DMM Pinto Rig Spacer 14mm (PUL120-SPA)

Description

The DMM Pinto Rig Spacer 14mm is a simple but essential add‑on for your DMM Pinto Rig pulley system. It prevents side plates from squeezing together when you use rope or webbing through the pulley’s top eyes. That protects the pulley’s performance and keeps your rigging smooth.

You add this spacer between the two side plates of a larger Pinto Rig pulley. When you pull rope through the pulley’s attachment holes, textile connectors like cord or webbing can press the plates inward. The spacer keeps them separated. That means the pulley runs the way it should — with less wear and better efficiency.

Without a spacer, direct textile attachment can pinch the side plates. That can reduce performance and cause extra friction. For jobs where rope or webbing runs through the top connections rather than a carabiner, this spacer fixes that issue quickly and cleanly.

The spacer is machined aluminium and shaped to fit the Pinto Rig pulley precisely. Its 14 mm inner diameter accepts carabiner bars or rope/textile connectors up to about 14 mm across. That gives you flexibility when rigging and lets you use a range of connectors without plate pinch.

Despite its role, it stays light in your kit — typically around 11–12 g. It doesn’t add bulk or weight, but it solves a common rigging problem that shows up when using slings or cords through the pulley eyes.

In short, the DMM Pinto Rig Spacer 14mm keeps your larger Pinto pulley running true. It stops side‑plate flex when rope runs through the attachments. Install it and trust that your pulley will perform consistently on every rigging job.

Pinto Rig Pulley PUL120 :
https://nqtrees.com.au/product/dmm-pinto-rig-pulley-pul120/